Control Air 6120

DDC Progammable Controllers

Control Air 6120

Any Sequence & Fully Capable

At a glance

  • I/O point count: up to 48 I/O points using the I/O Flex Ex8160
  • Built-in protocol support: BACnet, Modbus RTU, N2, and LonWorks
  • Remote access support over a modem


Bosch Control Air 6120

The Bosch Control Air 6120 Digital Direct Controller (DDC) can be customized to meet any sequence of operation needs. Fully capable of operating in a 100% stand-alone control mode, the Control Air 6120 can connect to a Building Automation System (BAS) using any of today’s four leading protocols: BACnet (ARC156, MS/TP, and PTP), Modbus, N2, and LonWorks. The point mapping to all of these protocols can be pre-set, so that the protocol and baud rates desired can be easily field-selected without the need for any additional downloads or technician assistance. The Control Air 6120 provides ample input/output capacity on the base controller, plus support for an expander board if additional capacity is needed.

Bosch Control Air 6120 Point Expander

Designed to expand the input/output capability of the Control Air 6120, the I/O Flex Ex8160 provides Control Air 6120 users with an additional 8 digital outputs and 16 inputs.

Compatible products

DDC Connected HMI Managers
Control Air M
DDC Connected HMI Managers
Control Air M+
Technical Documents